 |
SHRINKS
CGAT-6/2-O-STK
The shrink in the above picture is used to seal the connection between LyTec® and the electrical wire leading to the driver. It is shrunk onto the connection using a blowtorch. It can either be purchased at Elam or directly from Raychem, the manufacturer. The product number is: CGAT-6/2-O-STK.
ES 1000-No 1-C1-X-STK
The shrink in the above picture is used to seal the exposed end of LyTec®. It is shrunk onto the exposed end using a blowtorch. It can either be purchased at Elam or directly from Raychem, the manufacturer. The product number is: ES 1000-No 1-C1-X-STK.
WIRE STRIPPER
The “easy 2 strip” stripper is especially designed to strip and cut LyTec®. The cutting is done in one hole (marked C) and the stripping in another hole (marked S). The stripper is suitable for the General Purpose (2.3mm diameter) and the Outdoors (3.2mm diameter) wires.
CABLE TACKER STAPLER
The Cable Tacker is a stapler that has staples shaped like the wire contour. This enables the user to fasten the wire onto many surfaces with great ease. This method is appropriate for the following LyTec® families: Outdoors (3.2mm diameter), Thick Diameter (5mm diameter) and Double (2.8/3.5mm diameter).
For further information about the Cable Tacker Stapler please go to the supplier at:
http://www.desa.com/power/cable_tacker.html
PROFILES
LyTec® profiles are specially designed for using the
LyTec® EL wires in applications such as: marking stairways, escape
routes, Low Level Lighting (LLL) Systems and more. The profile’s
construction emphasizes the uniformity of the continuous light and
enhances the brightness. The aluminum profiles are available in
natural, anodized and black anodized metallic finishing (1.2 m, 2.4
m or 4.8m)
OMEGA PROFILE
A plastic profile, which holds and
protects the LyTec® Wire, dissipates its light and widens the angle
of the light emission.
COMBO
PROFILE
This wide, rigid and decorative profile is
designed for extensive durability, various stair-edge finishing
(concrete, carpet etc.) and is equipped with anti-slipping rubber
stripes.
STAIR OVERLAPPING
PROFILE
 Screwed down to finished stair edge and is designed to
prevent slipping.
PRISM PROFILE
Designed for assembling on ceilings.
SIMPLE PROFILE
To
be inserted in a floor or any other surface.
|
